Ultrasonic Two Side PE Coated Paper Cup Machine - QI T 161
QI T 161 is an ultrasonic two side PE coated paper cup machine. We install an ultrasonic system to this two side PE coated paper cup machine to seal the paper cup body. This ultrasonic paper cup forming machine solves the problem that two side PE coated paper cannot be sealed by heater. When a heater is adopted on the outside surface, PE film will be burnt, become yellow or blackish and make cups in ugly shape. Enjoying photoelectric detection, fault alarm and counting functions, Quest ultrasonic two side PE coated paper cup machine has become an ideal device for producing special beverage cups, tea cups, coffee cups, ice cream paper cups or other disposable cone type food paper containers. We should remember to keep the ultrasonic paper cup forming machine clean and lubricate the machine with oil regularly.
Ultrasonic two side PE coated paper cup machine runs a series of successive procedures, such as automatic paper feeding, sealing, oiling, bottom punching, heating, knurling, curling, cup discharging, etc. This ultrasonic paper cup forming machine is suitable for producing paper cups of which the length is less than 110 mm and the size ranges from 12 to 16 oz.
- Ultrasonic two side PE coated paper cup machine features stable performance, cheap operating cost, low investment and easy maintenance with minimum cost.
- It adopts optically controlled non-contact switch for automatic control.
- This ultrasonic paper cup forming machine possesses micro-controlled transducer and speed adjustment function.
- Ultrasonic two side PE coated paper cup machine mainly consists of ultrasonic sealing system, speed reducer, motor, knurling set, bottom heating set and inverter. It is easy to operate.
Parameters of QI T 161 Ultrasonic Two Side PE Coated Paper Cup Machine
|Paper Cup Size||12 to 16 oz|
|Speed||38 to 45 pcs/min|
|Paper Cup Top Diameter||Min. 45 mm to Max. 104 mm|
|Paper Cup Bottom Diameter||Min. 35 mm to Max. 75 mm|
|Paper Cup Height||Min.110 mm to Max. 140 mm|
|Raw Material||180 to 380 gsm, Single PE or Double PE Coated Paper|
|General Power||7 kW|
|Electricity||380 V, 3 Phases or 220V, 1 Phase|
|Measurement||2.8 m × 1.2 m × 1.8 m|